How To Find The Area Of A Pentagon

To find the area of a regular pentagon, with five equal sides and angles, you must know the length of each side and the length of the line from the center of each side to the center of the pentagon.

Step 1

Mark the midpoint of the regular pentagon and draw a line from each of the corners to the midpoint. If you do not know the midpoint, you can draw lines to the middle of the opposite side and erase half of it.

Step 2

Take one of these lines and extend it to touch the midpoint of the opposite side. This creates the apothem. Do this for each line to create 10 small right triangles with the same area. To proceed further you must know the length of the apothem. If you are working with a physical pentagon, measure the apothem.

Step 3

Find the area of one right triangle and multiply by 10 to get the total area of the pentagon. The area of a right triangle is found by the formula, 1/2 x base x height. The height is the apothem, and the base is half of a side of the pentagon.

TL;DR (Too Long; Didn't Read)

The same method applies to irregular pentagons, except that you break the pentagon into different-sized triangles, find the area of each separate triangle, and add the areas for the total area of the pentagon.

Cite This Article

MLA

Contributor, . "How To Find The Area Of A Pentagon" sciencing.com, https://www.sciencing.com/area-pentagon-5253373/. 24 April 2017.

APA

Contributor, . (2017, April 24). How To Find The Area Of A Pentagon. sciencing.com. Retrieved from https://www.sciencing.com/area-pentagon-5253373/

Chicago

Contributor, . How To Find The Area Of A Pentagon last modified March 24, 2022. https://www.sciencing.com/area-pentagon-5253373/

Recommended