How To Build A Stable Tower Out Of Straws

A stable tower built with straws is a common science project assigned to students in the public school system. The building of the tower is to help students understand the concept of weight-bearing and the principles of construction. Plastic drinking straws are an inexpensive item and are easy for students to manipulate. Make a stable tower using drinking straws positioned in right triangles. The triangles create stable building blocks to ensure the tower will not fall under its own weight.

Step 1

Measure and cut 40 drinking straws into 6-inch lengths.

Step 2

Cover a stable work surface with a 12-inch square of wax paper.

Step 3

Position three cut straws into a right triangle. Squeeze a drop of low-temperature glue at each corner. Repeat the process to create 40 right triangles.

Step 4

Position two triangles together to make a square. Squeeze a line of low-temperature glue along the length of the two straws extending diagonally across the square. Repeat the process for a total of 20 squares.

Step 5

Arrange the sides of four squares together to create a cube without a top and bottom. Squeeze a line of low-temperature glue along the joining edges.

Step 6

Place a straw square with a the diagonal line on the top of the cube you have made. Squeeze a line of low-temperature glue along the joining edges. Repeat the process to create four cubes. The top of the cube is considered the plane.

Step 7

Stand a 12-inch straw from the four corners on the top of one cube. Tilt the straws so they create a pyramid shape. Glue each straw to the corner with a dot of low-temperature glue. This section is the top section for the tower.

Step 8

Squeeze a drop of low-temperature glue on the top point of the pyramid to hold the four straws together.

Step 9

Place a cube on the stable work surface so the top is facing up. Sit a second cube on top of the first. Squeeze a line of low-temp glue along the joining edges. Repeat the process with the third cube.

Step 10

Place the top section of the tower on the three-cube base. Squeeze a line of low-temperature glue along the joining edges.