How To Calculate Percent Accuracy

Scientists evaluate experimental results for both precision and accuracy, and in most fields, it's common to express accuracy as a percentage. You do this on a per measurement basis by subtracting the observed value from the accepted one (or vice versa), dividing that number by the accepted value and multiplying the quotient by 100. Precision, on the other hand, is a determination of how close the results are to one another. If the results of an experiment are precise but inaccurate, that usually indicates a problem with the experimental methodology or equipment.

Advertisement

Formula for Percent Accuracy

In an experiment observing a parameter with an accepted value of VA and an observed value VO, there are two basic formulas for percent accuracy:

(VA – VO)/VA X 100 = percent accuracy

(VO – VA)/VA x 100 = percent accuracy

Advertisement

If the observed value is smaller than the accepted one, the second expression produces a negative number. It's easy to avoid this, but in some cases, negative values for percent accuracy can yield useful information.

Keeping Things Positive

In an experiment or test with multiple trials, researchers may want to average the percent accuracy – or percent error – of all the results to evaluate the experiment as a whole. Negative values for percent accuracy would skew the average toward zero and make the experiment appear more accurate than it is. They avoid this by using the absolute value of the difference between the observed and accepted values:

Advertisement

Percent accuracy = (VA – VO)/VA X 100 = (VO – VA)/VA X 100

For example, you may be testing a new type of thermometer that measures outside temperature by the electric current generated by a heat-sensitive material. You take a reading with the device and get 81 degrees Fahrenheit, while an accurate conventional thermometer reads 78 degrees Fahrenheit. If you're only interested in the accuracy of the new thermometer and don't care whether the temperature is lower or higher than the accepted value, you would use an absolute value in the numerator to calculate the percent accuracy:

(78-81)/78 X 100 = (81-78)/78 X 100 = 3/78 X 100 = 0.0385 X 100 = 3.85 percent

Negativity Can Be Useful

Positive and negative fluctuations of the observed value from the accepted one can yield important information. When researchers need this information, they don't take the absolute value of the difference between accepted and observed values, which allows the percentage to be negative.

Advertisement

In the thermometer experiment described above, allowing the error calculations to be negative would produce a percent accuracy of -3.85 percent. A series of measurements and error calculations would tell you whether the thermometer tended to record the temperature as too high or too low, and that could give you valuable information about the properties of the material you're using.

Cite This Article

MLA

Deziel, Chris. "How To Calculate Percent Accuracy" sciencing.com, https://www.sciencing.com/calculate-percent-accuracy-6199228/. 13 March 2018.

APA

Deziel, Chris. (2018, March 13). How To Calculate Percent Accuracy. sciencing.com. Retrieved from https://www.sciencing.com/calculate-percent-accuracy-6199228/

Chicago

Deziel, Chris. How To Calculate Percent Accuracy last modified March 24, 2022. https://www.sciencing.com/calculate-percent-accuracy-6199228/

Recommended

Advertisement