How To Calculate Voltage Across A Resistor

In 1827, a German physicist named Georg Ohm published a paper describing the interrelationship between current, voltage, and resistance in circuits. The mathematical form of this relationship became known as Ohm's Law, which states that the voltage applied across a circuit is equal to the current flowing through the circuit times the resistance within the circuit, or:

Advertisement

Voltage = Current x Resistance

You can use this relationship to calculate the voltage across a resistor.

Step 1

Consider the resistor that you want to calculate the voltage across. Suppose, as an example, that you are considering a 4 Ohm resistor.

Step 2

Measure the current passing through the wire in the circuit immediately after the resistor. Use a multimeter or ammeter to measure the current. Wire the multimeter or ammeter in series with the resistor in the circuit by cutting the circuit wire immediately after the resistor, then connecting the cut ends to the electrodes of the measuring device. For the example, suppose that the instrument indicated a current of 0.5 amps passing through the circuit after the resistor.

Advertisement

Step 3

Plug the resistance and current values into the Ohm's Law equation to calculate the voltage across the resistor. The calculation for the example would look like this:

Voltage = 0.5 A x 4 Ohms = 2 V

There are 2 volts of voltage across the resistor in this example.

Cite This Article

MLA

Banas, Timothy. "How To Calculate Voltage Across A Resistor" sciencing.com, https://www.sciencing.com/calculate-voltage-across-resistor-6404383/. 24 April 2017.

APA

Banas, Timothy. (2017, April 24). How To Calculate Voltage Across A Resistor. sciencing.com. Retrieved from https://www.sciencing.com/calculate-voltage-across-resistor-6404383/

Chicago

Banas, Timothy. How To Calculate Voltage Across A Resistor last modified August 30, 2022. https://www.sciencing.com/calculate-voltage-across-resistor-6404383/

Recommended

Advertisement