How To Convert Mm To Fractional Inches

Converting millimeters (mm) to fractional inches is a matter of rounding to the nearest 16th of an inch, since this is how far inches are broken down on rulers. The conversion factor between inches and mm is 25.4.

Advertisement

Step 1

Measure or identify the length in mm for the object of interest.

Step 2

Divide the amount in Step 1 by 25.4 to get the inches in decimal form.

Step 3

Take the decimal portion of the result of Step 2 and multiply it by 16. The point is to determine the nearest 16th of an inch on a ruler.

Advertisement

For example, 120 mm divided by 25.4 yields 4.7244 inches. Multiplying the 0.7244 by 16 gives 11.591. Round this to 12/16, or 3/4. The result, therefore, is 4 3/4 inches.

TL;DR (Too Long; Didn't Read)

If you're making the conversion from mm to fractional inches for tools, you'll probably want to use 32 instead of 16. Following the exact same calculations but using 32 instead of 16, the answer for the example would become 4 23/32 inches. Wire width conversion could entail converting to the nearest 64th of an inch.

Cite This Article

MLA

Dohrman, Paul. "How To Convert Mm To Fractional Inches" sciencing.com, https://www.sciencing.com/convert-mm-fractional-inches-6108935/. 24 April 2017.

APA

Dohrman, Paul. (2017, April 24). How To Convert Mm To Fractional Inches. sciencing.com. Retrieved from https://www.sciencing.com/convert-mm-fractional-inches-6108935/

Chicago

Dohrman, Paul. How To Convert Mm To Fractional Inches last modified March 24, 2022. https://www.sciencing.com/convert-mm-fractional-inches-6108935/

Recommended

Advertisement