The Disadvantages of Ion Exchange

Ion exchange resin beds remove impurities from water.
••• Clean water and water bubbles in blue image by Suto Norbert from

Ion exchange is widely used for water treatment in both industrial and municipal water treatment systems. The process provides many advantages over other treatment methods. It is environment friendly, can provide high flow rate of treated water and has low maintenance cost. Along with these benefits, there are certain disadvantages associated with ion exchange, such as calcium sulfate fouling, iron fouling, adsorption of organic matter, organic contamination from the resin, bacterial contamination and chlorine contamination.

Calcium Sulfate Fouling

The most common regenerant (chemical used to recharge the resin) used for cation resin is sulfuric acid. Some extremely hard water contains high amounts of calcium, and when this calcium reacts with the regenerating sulfuric acid, it forms calcium sulfate as a precipitate during the regeneration process. This precipitate can foul the resin beads and can block the pipes in the vessel.

Iron Fouling

Feed water from the underground water bores has soluble iron in the form of ferrous ion. Small amounts of this iron is removed by the ion exchange softeners, but if this feed water comes in contact with air before treatment, the ferrous ions are converted ferric ions. These ferric ions precipitate as ferric hydroxide after reacting with water. This compound can clog the resin beads and affect the resin efficiency. This can even result in failure of the softener column.

Adsorption of Organic Matter

Feed water from lakes and rivers usually contain high amounts of dissolved organic matter. The yellow or brown color of this feed water is due to the decayed vegetation and other organic matter present in it. These organic substances may be permanently adsorbed within the resin beads, resulting in reduced resin efficiency. The treated water quality is thus degraded. These organic contaminants can be removed prior to treatment with resin by treating the feed water with alum to precipitate the organic matter.

Organic Contamination from the Resin

The ion exchange resin itself can sometimes become the source of organic contamination. The new ion exchange resin often has organic elements remaining in the resin beads after manufacturing. Such contamination of the resin may be treated by passing the treated water through an ultra filtration treatment plant.

Bacterial Contamination

Ion exchange resins do not remove microorganisms like bacteria from the feed water but sometimes aid in the bacterial growth. The resin beds may accumulate organic matter which serves as a source of nutrient for continued growth of bacteria. When sterile water is required after the treatment, the demineralized water produced by the ion exchange treatment plant should be treated by heat, ultraviolet irradiation or very fine filtration. Ion exchange resins beds can also be treated with disinfectants such as formaldehyde but, not with heat or chlorine, as they will damage the resin.

Related Articles

How to Deionize Water
How to Make 24K Gold
What Is the Process of Water Treatment?
Potassium Permanganate Water Treatment
How to Treat High Conductivity in Water
Separation Techniques to Treat Water Sewage Treatment...
The Microorganisms Found in Sewage
How Does a Waste Water Treatment Plant Work?
How to Use Powdered Alum to Purify Water
The Effects of Sewage on Aquatic Ecosystems
Characteristics of Wastewater in a Distillery
Commercial Uses of Sodium Polyacrylate
What is the difference between hard and soft water?
How to Remove Chlorine From Water
Ozone Water Treatment Disadvantages
How Does Fertilizer Affect Aquatic Ecosystems?
The Effects of Silica on Steam Turbines
Different Ways to Raise the pH of Drinking Water
Natural Materials Used for Water Filtration