Factors That Affect RF Values In Thin Layer Chromatography

During thin layer chromatography, a technician places spots of a chemical mixture on a flat plate coated with a layer of absorbent material, then sits the lower portion of the plate in solvent. As solvent moves up the plate, chemicals in the mixture move up with it at different rates, so they separate. This test determines which chemicals are in a mixture by comparing the travel rates of unknowns to known standards. The results, however, can be affected by many factors.

Advertisement

TL;DR (Too Long; Didn't Read)

Retention factor values in thin layer chromatography are affected by the absorbent, the solvent, the chromatography plate itself, application technique and the temperature of the solvent and plate.

Retention Factors

The retention factor for a chemical during thin layer chromatography is a measure of how far it moves up the plate in response to the solvent movement. Since the absolute movement of the chemical depends on how far the solvent travels, you calculate retention factor values relative to the degree of solvent movement. The retention factor for a chemical is the vertical distance moved by the chemical from the spot where it was originally applied to the plate, divided by the distance traveled by the solvent — measured from the same starting point.

Advertisement

Thin Layer Chromatography Plate

The thin layer chromatography plate itself can affect the retention factor value obtained for a given chemical. Thin layer chromatography plates can be coated with a variety of absorbent solids; most frequently silica or alumina. Since the retention factor is based on the relative affinity of the chemical for the absorbent compared to the solvent, changing the absorbent can greatly change the retention factor. Also, the thickness and uniformity of the layer of absorbent can vary from plate to plate, especially if they are handmade. These factors can also change the retention factor value for chemicals.

Advertisement

Solvent Impacts Retention Factors

Since the solvent carries the chemical up the plate, the particular solvent used will also have a substantial impact on the retention factor value for the chemical. A solvent which has a stronger interaction for a particular chemical will more easily overcome any affinity of the chemical for the absorbent layer, and move that chemical farther in a given period of time. Mixtures of solvents can also have different effects depending on the proportion of each solvent.

Advertisement

Other Factors

There are a few other factors which may affect the retention factor in some cases. The temperature of the solvent and plate may make slight changes, since, for example, the solvent can often better dissolve the chemicals it is transporting at higher temperatures. The technique of the technician in applying the sample to the plate may also change the retention factor. Applying too much sample may result in large, diffuse bands of chemical moving up the plate, making it difficult to accurately measure the distance the chemical has been transported.

Advertisement

Cite This Article

MLA

Judge, Michael. "Factors That Affect RF Values In Thin Layer Chromatography" sciencing.com, https://www.sciencing.com/factors-values-thin-layer-chromatography-8561359/. 4 June 2018.

APA

Judge, Michael. (2018, June 4). Factors That Affect RF Values In Thin Layer Chromatography. sciencing.com. Retrieved from https://www.sciencing.com/factors-values-thin-layer-chromatography-8561359/

Chicago

Judge, Michael. Factors That Affect RF Values In Thin Layer Chromatography last modified August 30, 2022. https://www.sciencing.com/factors-values-thin-layer-chromatography-8561359/

Recommended

Advertisement