How To Make A Potato Lamp
It may seem strange that you can power a small light bulb, such as a light emitting diode (LED) using a potato, but it is possible. If you insert two different types of metal into the potato a chemical reaction takes place, as the potato contains phosphoric acid; it's a bit like acetic acid or vinegar. The metals act as electrodes and electrons flow from the negative electrode to the positive electrode inside the potato. This creates a small electrical current. If you wire a small light bulb to the electrodes, the current illuminates the bulb, so you get a potato lamp.
Step 1
Place the potato on a table. Insert the zinc nail into the potato slightly off center. Insert about 1 inch of the nail into the potato.
Step 2
Insert the copper nail into the potato about 1 inch away from the zinc nail. Make sure the same amount of nail is inserted into the potato.
Step 3
Attach the red wire from the LED to the end of the copper nail. Use a small strip of electrical insulating tape to hold the wire onto the nail.
Step 4
Attach the black wire from the LED onto the end of the zinc nail. Use tape to hold it in place. As soon as you connect the black wire to the nail the LED illuminates and you've made a potato lamp.
Things Needed
- Large potato
- 3-inch copper nail
- 3-inch zinc nail (or galvanized nail)
- 1-volt LED
- Electrical insulating tape
Cite This Article
MLA
Stevens, James. "How To Make A Potato Lamp" sciencing.com, https://www.sciencing.com/make-potato-lamp-8774396/. 24 April 2017.
APA
Stevens, James. (2017, April 24). How To Make A Potato Lamp. sciencing.com. Retrieved from https://www.sciencing.com/make-potato-lamp-8774396/
Chicago
Stevens, James. How To Make A Potato Lamp last modified March 24, 2022. https://www.sciencing.com/make-potato-lamp-8774396/