How To Make A Homemade Telescope Using Old Camera Lenses

The similarities between telescopes and camera lenses make it possible to use them interchangeably. The differences make it a bit of a challenge to use a telescope as a camera lens, but fortunately, the reverse is not as difficult. Converting a camera lens into a telescope will not allow you to view deep sky objects, but it will work as well as a small telescope for viewing the moon, planets and other close objects.

Step 1

Mark the exact center of the rear lens cap using a ruler and drill a 1.5-inch hole.

Step 2

Attach the PVC adapter to the lens cap by inserting it into the hole and then gluing it in place using the epoxy. Allow the glue to dry before moving on to the next step.

Step 3

Drill a small hole near the end of the PVC adapter. Insert the set screw just enough to hold it in place. This will be used to secure the eyepiece.

Step 4

Insert the eyepiece into the adapter and secure it in place by tightening the set screw.

Step 5

Attach the lens cap and eyepiece to the zoom lens and attach the zoom lens to the tripod. Focus the lens by manually twisting the lens.