How To Get A Square Root Answer From A Square Root On A TI-84

Almost every math-based class has a set of calculators, but the calculators don't always look the same. Sometimes a class requires a particular type of calculator, which can have functions arranged differently compared to other models of calculators. The learning curve might not be steep, but becoming familiar with a new calculator does take a little time and practice.

When using an unfamiliar calculator, start with basic calculations. Many calculators process input in exactly the order of input while other calculators process according to order of operations. Inputting simple calculation, such as:

\(3 × 4 + 6 ÷ 2\)

will show which process the calculator uses. In a sequential calculator, the answer will calculate as:

\(3 × 4 = 12\)
\(12 + 6 = 18\)
\(18 ÷ 2 = 9\)

In this case, either use parentheses or the memory function to group the numbers according to order of operations. If the calculator programming incorporates order of operations, then the sequence will correctly calculate as

\((3 × 4) + (6 ÷ 2) = 12 + 3 = 15\)

As with the basic calculations, function and second function keys may work by inputting the number and then the function or by identifying the function before entering the number. Experiment using simple calculations to determine which order, function first or number first, works for the calculator. The order of input might not be the same for the function and second function key, however, so test both.

The Texas Instruments 83 and 84 Graphing Calculators use function and second function keys. For ease of identification, second functions are written in yellow above the keys. Examining the key pad shows that the square root symbol (√) lies above the square function (x²) key, indicating that the square root key is a second function. To access second function keys, use the yellow key marked "2nd," found in the upper left corner of the key pad. Press "2nd," and then the key below the desired function symbol.

To find a square root using the TI-83 or TI-84, first push the "2nd" key and then the x² key to access the square root function. Now that you've identified the function, input the number. Press the "Enter" key to calculate the solution.

As an example, suppose the area of a square equals 225 square meters, and the problem is to find the length of the sides. To find the length of the sides of the square, recall that the area of a rectangle is found using the formula "length times width equals area." Since all sides of a square are equal in length, the formula for area becomes "length times length," or "length squared equals the area of a square." So, to find the length of a side of a square using the TI-83 or TI-84, start with the yellow "2nd" key, and then press the x² key to access the square root function. Input the area, 225, and press Enter to find the square root. The length of each side of the square equals 15 meters.

The Texas Instruments 84 Plus and 84 Plus Silver Graphing Calculators also use function and second function keys. Find the second functions written in blue above the keys. Note that the TI-84 Nspire edition shows the second function in blue in the upper left corner of each key. As with the TI-83 and TI-84, the second function key is in the upper left corner of the key pad. In the TI-84 Plus and TI-84 Silver Plus models, the second function key is colored blue to match the second function symbols.

Like the TI-83 and TI-84, the square root symbol (√) lies above the x² key on the TI-84 Plus and TI-84 Plus Silver Edition. To find a square root value, use the same procedure: Press the "2nd" key, the x² key, the number and Enter.